Outdoor terrazzo series
BOC series
For their sober, refined and elegant style, the BOC series of terrazzo tiles represent the most refined you can ask for an outdoor flooring. The upper surface is made of precious marble microchips and the bush-hammered effect fully shows color and brilliance, thanks to a particular procedure that avoids the splitting of the chips. BOC terrazzo tiles are produced in various colors, also available by other colors on specific request.
It is recommended to install it "with joint" of about 15 mm and to plaster a little low (avoid smearing with mortar or otherwise wash before it hardens).
Although the BOC terrazzo tile was created as floor tile, it can also be used as cladding.
BOC Shadow series
SHADOW technology is applicable to all BOC terrazzo tile series. It gets an exclusive decorations and chromatic effects through the total or partial sandblasting of the marble chips tile surface.
This technology is a stimulating creative tool for landscaping, indoor or outdoor rustic solutions.
Surprising effects can be obtained by combining various finishes and designs even in the same color.
ETNA series
ETNA series is a porphyry chips terrazzo tile that is deisghed to withstand strong mechanical stress of compression, impact and bending, in addition has an exceptional resistance to wear. It's also mostly waterproof, resistant to frost and oil, non-slip thanks to its deep sandblasting, so it is perfect for public and private sidewalks.
ETRUS series
ETRUS is an high-strength concrete slab which, with its particular "diagonally chiselled" surface and its appropriate colour, perfectly imitates the characteristic of natural Pietra Serena slab used for centuries as squares, streets and courtyards pavings of the most beautiful cities around Umbria and Tuscany regions.
The particular conglomerate, made exclusively of ferrous quartz and porphyry chips, makes ETRUS 677 (625) by far more resistant to wear and weathering than natural Serena stone slabs. And the cost is much lower.
To match the paving, we have in our production STRAIGHT and CURVED versions of kerbstone.
WASHED RIVER GRAVEL
series
WASHED RIVER GRAVEL terrazzo tiles has been widely used for years in outdoor pavings for its pleasantness and for its high resistance to wear and frost.
It is available in the classic pink and grey colors and in sizes 40x40 and 50x50 cm.
To match the paving, we have in our production the wall cover, the kerbstone and the plinth. They are produced with similar mixture to match perfectly all these products in a homogenous way.
IRW series: pebble diam. 5-10 mm.
ARW series: pebble diam. 15-30 mm.
BRW series: pebble diam. 30-40 mm.
GRABOC series
For their sober, soft and elegant style, the GRABOC terrazzo tiles repreent the most refined tiles you can ask as outdoor flooring. The upper surface is made of precious granite microchips and it gets the bush-hammered effect thanks to a particular procedure that avoids the splitting of the chips and show full color and brilliance.
GRABOC cement terrazzo tiles are produced in various standard colors, as well as in other colors on specific request.
It is recommended to install it "with joint" of 15mm approx and to plaster a little low (avoid smearing with mortar or otherwise wash before it hardens).
Although GRABOC terrazzo tiles was created as floor tile, it can be used as wall cladding as well.
GRABOC SHADOW series
SHADOW technology is applicable to all GRABOC terrazzo tile series. Its get an exclusive decorations and chromatic effects through the total or partial sandblasting of the marble chips tile surface.
This technology is a stimulating creative tool for landscaping , indoor or outdoor rustic solutions.
Surprising effects can be obtained by combining various finishes and designs even in the same color.
GRAMAR SHADOW series
SHADOW technology is applicable to all GRAMAR terrazzo tile series. Its get an exclusive decorations and chromatic effects through the total or partial sandblasting of the marble chips tile surface.
This technology is a stimulating creative tool for landscaping , indoor or outdoor rustic solutions.
Surprising effects can be obtained by combining various finishes and designs even in the same color.
ROUGH series
This series of products is composed by low-cost cement tiles with high resistance to wear and frost.
Products with double layer of cement, vibrated and pressed, have the natural “raw” surface as it comes out from the press mold.
It can be produced in many colors and in the following sizes: cm. 25×25, 40×40, 40×60, 50×50.
INCERTUM series
INCERTUM is the ideal solution for both urban and private paving spaces, even with very heavy traffic for its resistance to wear and frost and because it is slip-proof. Peculiar characteristic of INCERTUM is its upper surface made of porphyry or precious marble and it has”drawn” on the style of an installed opus incertum stone.
LEONARDO series
LEONARDO is the high-strength concrete slab where the visible layer is made of pure granite grit. The surface finish "deep sandblasted", fully shows the beauty of the precious aggregates.
MALLEUS ROUGH
MALLEUS rough is a prefabricated double layer concrete tile ( vibrated and pressed in hermetic presses) . It is also high resistant to wear and frost , impact, compression and bending. The surface finishing is rough hammered.
Also available with sandblasted finishing (Malleus toto).
WASHED MARBLE CHIPS series
WASHED MARBLE CHIPS is a prestigious alternative to WASHED RIVER GRAVEL, especially when is required to get a striking effect. Infact in this series have been used chips of various colours from the finest quality of italian marble; the cement bases can be white or also coloured.
It is available both in cm 40×40 and in cm 50×50.
Ask for the complete range of colors.
OTTO series
OTTO series surface is made of real porphyry chips (cod. 428) or of fine marble microchips.
It’s mouled into nine ashlars which forms an octagon. Finish can be honed (Honed Otto) or sandblasted (Otto Shadow)
OTTO SHADOW (same as OTTO, only difference is sandblasted finishing on honed surface)
Size: 40x40 cm
PIETRINI series
PIETRINI tiles represents a traditional, economical and always valid solution to pave sidewalks and outdoor spaces in general.
PIETRINI tiles have the characteristics of being anti-slip, frostproof and easy to clean. They prevent grass growing, and easy to replace in case of road works for electric lines and sewage or other…
SIZE: 25x25 cm
PORFIRIUS (TOP/DOP) series
The PORFIRIUS series is a unique outdoor flooring for elegance and resistance, ideal for squares, sidewalks, historic town centers, public and private gardens.
The surface, in real porphyry or marble chips, is honed and shaped into small ashlars which repeat and enhance the color and design of the porphyry cubes.
PORFIRIUS is produced in two models:
– TOP with “fan-shaped” ashlars ;
– DOP with “chessboard-shaped” ashlars
PRF series
PRF is a perfect concrete tile to pave both urban and private spaces , even if the streets will be congested, because it has very high wear and frost resistance and also because it is anti-slip. Outward surface is made of chalky , siliceous and quartz sands designed as little chesses round shaped (fan pattern) that reply the same porphyry rustic chess design.
PW TOTO series
PW toto is a special high elegance outdoor paving. It is made of marble slabs mosaic among the finest in Italy. Although industrially produced, the arrangement of stone elements is made by skilled craftsmanship. Special finishing “antique” style gives a further singular charm.
ROCKYMATT series
RockyMàtt is a concrete tile that mimics split stone with its “naturally undulating” surface.
It is composed of 6 different sizes that combined together give the possibility to obtain a pleasant combination that recalls the variety of natural squared stones.
STONE series
STONE is the high resistance concrete tile, its surface tries to imitate the natural ripple of the stone. In addition to the classic smoothed surface in cement , it is also available the Shadow TOTO version that has sandlasted surface. In the STONE version toto 677 the surface is far more resistant to wear and frost because it is made of quartz and porphyry chips.
SUPER LIGNUM series
SUPER LIGNUM is a prefabricated double layer cement tile (vibrated and pressed in hermetic presses) with high resistance to wear and frost, impact, compression, bending . Surface finishing is sandblasted and it imitates a wooden slatted floor.
YESQUARZ series
YESQUARZ tile is made of quartz chips that, in addition to have an exceptional wear resistance, is able to withstand strong mechanical stress of compression, impact and bending, is poorly permeable to water, resistant to frost and oil, is dustproof and non-slip thanks to a deep sandblasting; it is ideal for public and private sidewalks.
ZETA shadow series
On the ZETA terrazzo tile series, the SHADOW technology is applicable. It allows unique and various decorations through total or partial sandblasting of tile surface.
This process is a stimulating creative tool to design outdoor solutions, roofing and rustic interiors.
Amazing effects can be achieved by combining the various finishes and designs even in the same color.
It’s possible to evaluate the realization of a custom-made specific logo or design, please contact us to talk about it!
